INFO Update Setool V1.02 Updated!

v0.915057

- added support for repair dead db3200-based lg phones (gt505,etc)

procedure:
if /sys partition damaged
(you CAN'T read gdfs, eraseSecData errors)
add to firmware area gt505_syspart_fix.ssw
press flash
unlock phone
fullflash phone

if /drm partition damaged
(phone blinks on lg logo after /sys repair and you CAN read gdfs)
add to firmware area gt505_drm_fix.ssw
press flash
unlock phone
fullflash phone

- added support for repair semc a2 phones with flash cid>otp cid
procedure:
check "use signed mode",
"use alternative security bypass",
"use preloader security bypass"
press unlock
credits consumption same as a2 cid53 unlock feature. 

link : http://rapidshare.com/files/314734654/v0.915057.rar
=================================================
v0.915058
=============

- added support for repair erom on semc new security locosto,neptune phones.

procedure:
1. select correct model
2. on settings check "signed mode"
3. add erom to firmware tab.
if you have neptune based phone: 1207-7713_EROM_S1_NEPTUN_HS_SEMC_SIMLOCK_R7A024.sin
if you have locosto based phone, then select situable from:
J132_EROM_S1_LOCOSTO_HS_USB_R5A038_64k.sin
K330_T280_T270_EROM_S1_LOCOSTO_HS_R5A028.sin
R300_R306_T303_S1_LOCOSTO_HS_R5A031_128.SIN
T250_CXC1250616_EROM_S1_LOCOSTO_HS_R5A022.sin
Z250_Z320_EROM_S1_LOCOSTO_HS_R5A023.sin
4.press recovery

procedure require internet connection and paid: locosto based - 1 credit, neptune based - 2 credits.

- added support for high speed usb flashing. flashing speed of semc a2 phones will be twice as usual.
- some bugs fixed, one was very important

Download V0.915058

http://rapidshare.com/files/348747393/v0.915058.rar
============================================
v0.915059

- broken db200x PDA support, fixed
- broken alternative bypass support, fixed

Download here

v0.915060

- broken calypso lite support, fixed
- further fixes for alternative bypass support

Silahkan.... http://rapidshare.com/files/350418848/v0.915060.rar


http://support.setool.net/showthread...D-NEWS/page150

 ========================================

v0.915061

- added support for S1 AID04 neptune-based phones.
there is no alternative security bypass for such phones, so only full network unlock supported.
- added support for A2 CID80.
there is no alternative security bypass for such phones, so only full network unlock supported.
- few bugfixes.

http://setool.net/support/cardmain.p...tware%20files/

alternatif link:

=================================

v0.915062


- broken pnx5230 support,fixed
- solved "starting up..." hang issue when user installed usbflash drivers, but not connected any phone yet.

http://rapidshare.com/files/355636054/v0.915062.rar

=========================================

v1.0 FINAL

- added standalone support for reset operation, alternative security bypass for next chipsets:

supported s1 aid 0001,0002,0003.
supported a1/a2 cid 16,29,36,49,50,51,52,53,80

s1 omap
s1 locosto
s1 neptune
db 200x
db 201x
db 2020
db 3150
db 3200
db 3210
db 3350

Download Link: 

Setool V1.01 Updated!


v1.01 FINAL

fixed a2 cid80 support


http://rapidshare.com/files/363088148/v1.01.rar

========================================

v1.02

- added preliminary support for a2 cid26 phones (s5320 at the moment)
at the moment, network unlock possible by flashing special firmware from support
samsung s5320 should be connected with "9+#" pressed in order to enter boot mode.
all other functions supported without notable exceptions.

- added a2 db3150,db3200,db3210 emptyboard fill support.
you need special cable in order to successfully write OTP chip, +7.5v should be applied to DCIO (charger pin, pin 12)

Download v1.02

activation required in order to use that update.
just unpack 1.02.rar in existing setool2 directory
( setool2.ini not included in dist anymore, so your password/username will not be overwritten)
and run activator.exe.
i strongly advice users to run only activator.exe which included in v1.02 archive or from that LINK.

activation cost 20 credits.

activation will assure that you will be able to use latest setool2 updates and use new support area.
old support area will be frozen, no new flash files will be uploaded on it. also, old support area will be terminated in that year

thanks for your support. 

 

v1.02 - SETool update. ACTIVATION REQUIRED.
- added preliminary support for a2 cid26 phones (s5320 at the moment)
- added a2 db3150,db3200,db3210 emptyboard fill support.
you need special cable in order to successfully write OTP chip, +7.5v should be applied to DCIO (charger pin, pin 12)

http://rapidshare.com/files/369479447/v1.02.rar

activation required in order to use that update.
just unpack 1.02.rar in existing setool2 directory
( setool2.ini not included in dist anymore, so your password/username will not be overwritten)
and run activator.exe.
http://rapidshare.com/files/369481181/Activator.zip

activation cost 20 credits.

thanks for your support.

 

=================================== 

v1.03

- broken db2000,db2010 red cid49 support unsigned mode, fixed.